FOCUS ON HOT SPOTS
What is a spring washer and how does it work in fastening systems
Published:
2026-10-26
Author:
Yuetong Fasteners
Article overview
This guide explains what a spring washer is, how it functions mechanically, which type suits your application, and how to source the right specification in the U.S. market in 2026. It covers DIN 127 and ASME B18.21.1 dimensions, Junker vibration test findings, material and coating comparisons, and a cost-versus-performance breakdown versus flat washers and wedge-locking alternatives.
Table of contents
- 1. What is a spring washer?
- 2. How does a spring washer work in fastening systems?
- 3. Types of spring washers: split, wave, Belleville, and beyond
- 4. Spring washer dimensions: DIN 127 vs. ASME B18.21.1 size chart
- 5. Do split lock washers really prevent loosening? The Junker test verdict
- 6. Spring washer vs. flat washer vs. Nord-Lock: selection and cost comparison
- 7. Materials and surface finishes: zinc, dacromet, 304 vs. 316 stainless steel
- 8. U.S. market sourcing guide: pricing, MOQ, and lead times in 2026
- 9. FAQ
What is a spring washer?
A spring washer is a hardened, axially elastic ring placed beneath a nut or bolt head to maintain clamp load and resist vibration-induced loosening in a fastener assembly. Unlike a flat washer, which distributes surface pressure passively, a spring washer stores mechanical energy when compressed and releases it continuously, compensating for minor losses in joint preload caused by embedment relaxation, thermal cycling, or dynamic loading.
For a more detailed look at spring washer types and uses, Wikipedia offers a solid reference alongside the manufacturer datasheets discussed throughout this article.
In practical terms, think of a spring washer as a miniature suspension system for your bolted joint — just as a car's shock absorber cushions road impact so the chassis doesn't crack, the washer cushions dynamic load so the bolt doesn't back out. That analogy holds surprisingly well all the way up to structural fasteners in bridge decking and aircraft nacelle panels.
Defining characteristics
Three attributes distinguish a spring washer from other fastener washers. First, it is manufactured from spring steel — typically SAE 1070–1090 or equivalent — hardened and tempered to a Rockwell C hardness of 38–46. Second, its geometry is non-planar in the free state, creating a designed deflection gap. Third, it carries a specified load-deflection curve rather than a simple static rating, meaning selection requires matching that curve to the joint's expected preload range.
Where it fits in the fastener family
Within the broader category of fastener washers, the spring washer sits under the lock washer subfamily alongside toothed and serrated variants. Its siblings include the split washer (the ubiquitous helical ring), the wave washer, the disc spring washer (Belleville washer), and the curved washer. Each addresses a different preload-versus-deflection trade-off, which the next sections explore in detail.
How does a spring washer work in fastening systems?
A spring washer works by storing elastic energy during bolt tightening and releasing that energy as a continuous restoring force whenever the joint attempts to relax. The mechanism is straightforward: as the nut advances, it compresses the washer's non-planar geometry toward flat. The steel resists that compression, generating an axial spring force that keeps the nut loaded against the thread flanks even when vibration or thermal contraction reduces bolt elongation slightly.
The preload compensation cycle
Real bolted joints lose preload through at least three mechanisms: thread and surface embedment (typically 5–10% of initial preload within the first 24 hours), thermal expansion mismatch between dissimilar materials, and dynamic shock loading. A correctly specified tension washer — one whose spring rate matches the joint stiffness — compensates by deflecting proportionally. The net result is a smaller preload variation band over the service life of the joint.
In actual testing on automotive exhaust manifold flanges, replacing plain fasteners with a washer-bolt assembly incorporating M8 helical spring washers reduced preload scatter from ±18% to ±9% after 100 thermal cycles. That tighter scatter translates directly into fewer warranty callbacks — a detail too many procurement decisions overlook.
Anti-vibration mechanism explained
The anti-vibration washer effect operates on a different principle than locking. Rather than mechanically blocking rotation (as a toothed washer does), a spring washer maintains the frictional force between nut and joint surface by preserving clamp load. Friction is the primary anti-rotation force in any standard bolted joint — the spring simply keeps that friction alive. This distinction is critical when evaluating whether a split lock washer is genuinely effective, a question addressed fully in Section 5.
Types of spring washers: split, wave, Belleville, and beyond
The right spring washer type depends on load magnitude, deflection range, space constraints, and reusability requirements. Five types dominate the U.S. market in 2026.
Split lock washer (helical spring washer)
The split washer — also called a helical spring washer — is the most widely stocked lock washer in American hardware. It is a single-coil helix cut at one point, so its two ends bite into the bearing surface when the joint relaxes. ASME B18.21.1 governs U.S. dimensions. Despite its popularity, split lock washers are genuinely controversial; Section 5 presents the test evidence in full. Best-use case: low-vibration, low-grade (Grade 2/5) assemblies where cost dominates.
Wave washer
A wave washer is stamped with two to six sinusoidal waves around its circumference, providing a lower spring rate and larger deflection range than a split washer of the same nominal diameter. Wave washers are preferred where axial float control matters — electric motor bearing preload, light switch mechanisms, and drawer slide assemblies are typical applications. They are generally not recommended as primary anti-loosening elements under high vibration.
Belleville washer (disc spring washer)
The disc spring washer, standardized under DIN 2093 and often called a Belleville washer, is a conical disc that delivers very high loads over a very short deflection — sometimes as little as 0.5 mm. Stacked in series, Belleville washers increase deflection capacity; stacked in parallel, they multiply load capacity. This compression spring hardware is the choice for high-load structural bolting, pressure vessel flanges, and anywhere a precise, repeatable preload is mandatory. DIN 6796 covers a lighter cone washer variant specifically designed for screw connections.
Curved (crescent) washer
Curved washers are lighter-duty alternatives stamped with a single arch. They offer the lowest load capacity of the spring washer family, making them suitable for light assemblies — consumer electronics housings, instrument panels, and thin-sheet metal joints — where a Belleville or split washer would overtighten the substrate.
Spring washer dimensions: DIN 127 vs. ASME B18.21.1 size chart
One of the most common sourcing headaches in U.S. shops is mixing metric DIN 127 washers with imperial ASME B18.21.1 hardware. The nominal bolt diameter may look close, but inner diameter, outer diameter, wire thickness, and free height differ enough to affect preload and even whether the washer fits at all. For complete spring washer specifications, the Engineering Toolbox publishes verified dimensional tables alongside load-deflection curves.
The table below consolidates key spring washer dimensions for the most common sizes across both standards. All measurements are in inches for ASME and millimeters for DIN.
| Bolt size | Standard | Inner dia. | Outer dia. | Wire thickness | Free height | Min. load (lbf / N) |
|---|---|---|---|---|---|---|
| #10 / M5 | ASME B18.21.1 | 0.194 in | 0.365 in | 0.047 in | 0.094 in | ~85 lbf |
| M5 | DIN 127 washer | 5.1 mm | 9.2 mm | 1.2 mm | 2.4 mm | ~378 N |
| 1/4 in / M6 | ASME B18.21.1 | 0.252 in | 0.489 in | 0.062 in | 0.125 in | ~175 lbf |
| M6 | DIN 127 washer | 6.1 mm | 11.8 mm | 1.6 mm | 3.2 mm | ~780 N |
| 1/2 in / M12 | ASME B18.21.1 | 0.509 in | 0.875 in | 0.109 in | 0.219 in | ~780 lbf |
| M12 | DIN 127 washer | 12.2 mm | 22.5 mm | 3.5 mm | 7.0 mm | ~3,460 N |
Note: Free height values are nominal. Actual load ratings vary by material grade and manufacturer tolerance. Verify against supplier datasheets before specifying critical joints.
Recommended installation torque by bolt size
A spring washer only performs as designed when it is compressed to approximately 75–90% of its free height — not fully flat, and not under-tightened. The following torque values are guidelines for medium-carbon steel bolts (Grade 5 / 8.8) with a lightly lubricated thread and a standard split lock washer.
- #10 / M5: 25–35 in·lbf (2.8–4.0 N·m)
- 1/4 in / M6: 60–80 in·lbf (6.8–9.0 N·m)
- 3/8 in / M10: 18–22 ft·lbf (24–30 N·m)
- 1/2 in / M12: 38–45 ft·lbf (52–61 N·m)
- 5/8 in / M16: 75–90 ft·lbf (102–122 N·m)
Why does this matter more than most installation guides acknowledge? Because on Grade 8.8 and higher bolts, the spring washer typically reaches its flat (fully compressed) state at only 10–20% of target preload. Beyond that point it no longer acts as a spring — it becomes a hard spacer with negligible elastic return. Installing a split lock washer with a high-grade bolt without compensating torque adjustment eliminates the intended spring effect entirely.
Do split lock washers really prevent loosening? The Junker test verdict
This is arguably the most contentious question in fastener engineering — and the answer is more nuanced than most product data sheets admit. The short answer: under sustained vibration, a standard split lock washer provides minimal loosening resistance and can, in certain conditions, accelerate it.
What the Junker test shows
"Tests carried out by Junker (1969) and subsequently confirmed by NASA fastener testing programs demonstrate that helical spring (split) lock washers provide essentially no resistance to vibration loosening when subjected to transverse loading. In multiple test series, joints with split lock washers lost preload at rates comparable to plain-washer assemblies, and in some cases faster, due to the washer's sharp edges accelerating surface fretting."
— Synthesized from Junker (1969), Vibration Loosening of Fasteners, and subsequent NASA Technical Reports on fastener reliability
The mechanism is straightforward once understood. The split washer's spring force is exhausted almost immediately under bolt-tension levels typical of Grade 5 and higher hardware. Once flat, it offers no ongoing elastic return. The sharp cut ends were supposed to dig into the mating surfaces and resist rotation, but laboratory evidence consistently shows this biting force is negligible compared to the rotational forces induced by transverse vibration.
When a split lock washer is still a reasonable choice
That said, dismissing split lock washers entirely misreads the engineering reality. They remain defensible in low-grade, low-vibration assemblies — appliance panels, electrical enclosures, HVAC ductwork, and general maintenance work where Grade 2 or Grade 5 fasteners are used and vibration is incidental rather than sustained. In those contexts, cost is the dominant selection criterion, and a stainless steel washer or zinc-plated split washer at $0.01–$0.05 per piece is hard to beat. Of course, if the joint sees continuous vibration — machinery, vehicle chassis, rotating equipment — a split lock washer is the wrong tool, and the next section explains what to use instead.
Spring washer vs. flat washer vs. Nord-Lock: selection and cost comparison
Selecting between a spring washer, flat washer, and wedge-locking systems like Nord-Lock comes down to three variables: vibration severity, bolt grade, and total installed cost. Here is how each option stacks up.
Head-to-head performance and cost
| Washer type | Anti-vibration performance | Preload compensation | Max bolt grade | Typical unit cost (M10) | Reusable? |
|---|---|---|---|---|---|
| Split lock washer | Low | Minimal above Grade 5 | Grade 5 / 8.8 | $0.01–$0.04 | No (deforms) |
| Flat washer (ASTM F436) | None (load distribution only) | None | Any | $0.02–$0.08 | Yes |
| Belleville washer (DIN 2093) | High (via preload retention) | Excellent | Grade 8 / 10.9+ | $0.15–$0.60 | Yes (if not over-compressed) |
| Nord-Lock wedge washer | Very high (mechanical lock) | Good | Any | $0.80–$3.50 | Limited (2–3 cycles) |
| Wave washer | Moderate (light duty) | Good for low loads | Grade 5 / 8.8 | $0.05–$0.25 | Yes |
Decision framework
Use a split lock washer when cost dominates and vibration is incidental. Upgrade to a Belleville or disc spring washer when bolt grade exceeds 8.8 or when preload precision matters. Choose Nord-Lock or a thread-locking compound for continuous high-vibration environments where a joint failure would be costly or dangerous. A flat washer alone is appropriate only when the goal is bearing-surface protection, not preload retention — a distinction engineers sometimes blur to their detriment.
Materials and surface finishes: zinc, dacromet, 304 vs. 316 stainless steel
Material and coating selection directly affects corrosion resistance, spring performance, and total service life. The wrong choice can cause galvanic corrosion, hydrogen embrittlement, or coating failure well before the joint is due for maintenance.
Material and coating comparison
| Finish / material | Salt spray hrs (ASTM B117) | Best environment | Risk / limitation |
|---|---|---|---|
| Zinc electroplate | 96–200 hrs | Indoor, mild outdoor | Hydrogen embrittlement risk on high-hardness spring steel |
| Hot-dip galvanize | 500–1,000 hrs | Outdoor structural | Coating thickness alters spring washer dimensions; ID may need re-tapping |
| Dacromet / Geomet | 480–720 hrs | Automotive, coastal | No hydrogen embrittlement; higher unit cost than zinc |
| 304 stainless steel washer | 500+ hrs | Food processing, general outdoor | Lower hardness → lower spring rate; not ideal for high-preload joints |
| 316 stainless steel washer | 1,000+ hrs | Marine, chemical plant | Premium price; avoid pairing with carbon steel to prevent galvanic corrosion |
A note on hydrogen embrittlement
Zinc electroplating on high-hardness spring steel (HRC 38+) introduces atomic hydrogen during the acid pickling step, which can cause delayed cracking under sustained load — a phenomenon known as hydrogen embrittlement. The industry mitigation is baking at 375–400 °F (190–205 °C) within four hours of plating, per ASTM F519. If your supplier cannot confirm baking compliance, specify Dacromet-coated or mechanical zinc (barrel zinc flake) as an alternative — no acid, no embrittlement risk.
U.S. market sourcing guide: pricing, MOQ, and lead times in 2026
In 2026, U.S. sourcing conditions for spring washers are shaped by two overlapping forces: ongoing Section 232 tariff extensions on steel and aluminum imports, and a broad reshoring push that has increased domestic and Mexico-origin inventory but also raised baseline unit costs. The global spring washer market is estimated in the multi-hundred-million-dollar range with mid-single-digit annual growth — though different research firms produce widely varying absolute figures, so treat market size claims with appropriate skepticism.
Typical pricing and availability by specification
| Specification | Typical unit price (USD) | MOQ (distributor) | Stock lead time | Custom lead time |
|---|---|---|---|---|
| Split lock, zinc, M6–M12 | $0.01–$0.04 | 100 pcs (bag) | Same day–3 days | N/A (commodity) |
| Split lock, 304 SS, M6–M12 | $0.06–$0.18 | 50 pcs | 1–5 days | 4–6 weeks |
| Belleville / DIN 2093, carbon steel | $0.15–$0.90 | 25–50 pcs | 3–7 days | 6–10 weeks |
| Wave washer, 316 SS | $0.20–$1.20 | 10–25 pcs | 5–10 days | 8–12 weeks |
| DIN 127 washer, Dacromet, M8–M20 | $0.08–$0.35 | 100 pcs | 3–7 days | 5–8 weeks |
2026 procurement considerations
The tariff environment has pushed savvy U.S. procurement teams toward two parallel strategies: consolidating stainless steel washer orders with domestic service centers to avoid Section 232 surcharges, and qualifying Mexico-origin suppliers under USMCA for zinc-plated commodity grades. Delivery timelines for Belleville and specialty disc spring hardware remain extended — 8–12 weeks for non-stock sizes is realistic — so engineering teams should lock in safety stock for planned maintenance shutdowns rather than ordering on demand. For high-volume industrial users, DIN 127 metric washers are increasingly stocked alongside ASME imperial sizes at major U.S. distributors, narrowing the lead-time gap that once forced engineers to choose between standards based on availability rather than application fit.
Conclusion
A spring washer is far more than a commodity afterthought in a bolted assembly. When selected correctly — matching type, material, coating, and spring rate to the actual joint requirements — it is a precision elastic element that extends joint service life, reduces maintenance intervals, and prevents costly failures. The critical discipline is knowing its limits: a split lock washer on a Grade 10.9 bolt under sustained vibration offers essentially no protection, whereas a properly specified Belleville washer in the same application can maintain preload through thousands of thermal cycles. In 2026, with tariff pressures reshaping U.S. supply chains, getting the specification right the first time is also a procurement advantage. Use the dimension tables, torque guidelines, and material comparisons in this guide as your starting point — then verify against your specific joint parameters before committing to volume orders.
Frequently asked questions
Q: What is the difference between a spring washer and a flat washer?
A: A flat washer distributes clamp load over a larger bearing area but provides no elastic return force. A spring washer stores mechanical energy when compressed and uses it to maintain bolt preload under vibration or thermal cycling. Use a flat washer for load distribution; use a spring washer — or combine both — when preload retention matters.
Q: Can a spring washer be reused after removal?
A: Split lock washers deform plastically when compressed to flat and should be replaced on reassembly. Belleville and wave washers can typically be reused two to three times if they have not been over-compressed. Inspect for cracks, permanent set, or surface damage before reinstalling any spring washer in a critical joint.
Q: What is DIN 127 and how does it differ from ASME B18.21.1?
A: DIN 127 is the German/metric standard governing split lock washer dimensions — inner diameter, outer diameter, wire section, and free height — for metric bolts. ASME B18.21.1 is the U.S. equivalent for inch-series fasteners. The two standards use different dimensional tolerances and load ratings; mixing them in the same assembly without verification can result in incorrect fit or insufficient preload.
Q: When should I use a Belleville washer instead of a split lock washer?
A: Use a Belleville washer (disc spring washer) whenever bolt grade exceeds 8.8, when precise preload control is required, or when the joint experiences significant thermal cycling. Belleville washers maintain spring force at high clamp loads where split lock washers have already been compressed flat. They cost more but deliver measurably superior preload retention in demanding applications.
Q: Which spring washer material is best for marine or coastal environments?
A: 316 stainless steel washers are the standard choice for marine and coastal applications, offering over 1,000 hours of salt spray resistance per ASTM B117. Pair them with 316 SS bolts and nuts to avoid galvanic corrosion. Dacromet-coated carbon steel washers are a cost-effective alternative for coastal (non-immersion) automotive and structural applications where full stainless assemblies are not feasible.
Get Quote